|
Ford E-250 Econoline Recalls
| Recall Date: |
MAR 06, 2008 |
| Component: |
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
| Model Affected: |
E SERIES |
| Units Affected: |
1937
Recall Details
|
Recall Date:
MAR 06, 2008
Model Affected:
1980 FORD E SERIES
Summary:
INTERCONTINENTAL AUTO PARTS IS RECALLING 1,937 FUEL FILTERS, P/NOS ALG 44/1 AND PUROLATOR F10024, SHIPPED BETWEEN JANUARY 14 AND FEBRUARY 13, 2008, SOLD FOR USE ON THE VEHICLES LISTED ABOVE. THE FILTER'S OUTLET CAP MAY NOT BE SECURELY CRIMPED TO THE HOUSING. THIS COULD RESULT IN A SEPARATION OF FILTER'S OUTLET CAP FROM THE HOUSING.
Consequence:
IF THIS CONDITION OCCURS WHILE ATTEMPTING TO START THE VEHICLE, A NO START CONDITION MAY RESULT AND FUEL MAY BE PUMPED ONTO THE GROUND. IF THIS OCCURS WHILE THE VEHICLE IS IN MOTION, THE ENGINE MAY STOP DUE TO INADEQUATE FUEL SUPPLY. IF AN IGNITION SOURCE WERE PRESENT, FUEL LEAKAGE MAY RESULT IN A FIRE.
Remedy:
INTERCONTINENTAL WILL REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING MARCH 2008. OWNERS MAY CONTACT INTERCONTINENTAL AT 800-451-2593.
Units Affected:
1937
Notes:
INTERCONTINENTAL AUTO PARTS
| Recall Date: |
AUG 27, 2007 |
| Component: |
FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP |
| Model Affected: |
E250 |
| Units Affected: |
34000
Recall Details
|
Recall Date:
AUG 27, 2007
Model Affected:
1980 FORD E250
Summary:
CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK.
Consequence:
A LEAKING FUEL PUMP COULD CREATE A VEHICLE FIRE HAZARD.
Remedy:
FEDERAL-MOGUL WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMPS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 15, 2007. OWNERS CAN CONTACT FEDERAL-MOGUL AT 248-354-7700.
Units Affected:
34000
Notes:
FEDERAL-MOGUL CORPORATION
| Recall Date: |
JUL 14, 1980 |
| Component: |
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM |
| Model Affected: |
E250 |
| Units Affected: |
4
Recall Details
|
Recall Date:
JUL 14, 1980
Model Affected:
1980 FORD E250
Summary:
DUE TO COMPUTER INPUT ERROR WHICH RESULTED IN AN INCORRECT BUILD SCHEDULE, SOME VEHICLES WERE SHIPPED WITHOUT THE REQUIRED EXHAUST SYSTEM HEAT SHIELDS. WHEN THE VEHICLE IS IDLED OVER AN EXTENDED PERIOD OF TIME, A MISSING EXHAUST HEAT SHIELD MAY RESULT IN DANGEROUSLY HIGH FLOOR PAN TEMPERATURES.
Consequence:
Remedy:
DEALER WILL INSTALL FRAME-MOUNTING HEAT SHIELDS WITHOUT CHARGE TO OWNER.
Units Affected:
4
Notes:
FORD MOTOR COMPANY
| Recall Date: |
JUN 09, 1980 |
| Component: |
WHEELS:CENTER SECTION |
| Model Affected: |
E SERIES |
| Units Affected: |
12500
Recall Details
|
Recall Date:
JUN 09, 1980
Model Affected:
1980 FORD E SERIES
Summary:
CERTAIN VEHICLES WERE PRODUCED WITH WHEEL ASSEMBLIES THAT MAY HAVE CRACKS NEAR THE BOLT HOLES IN THE WHEEL DISC. DURING VEHICLE USE, THE CRACKS COULD GRADUALLY INCREASE AND RESULT IN PARTIAL OR COMPLETE SEPARATION OF THE WHEEL AND TIRE ASSEMBLY FROM THE VEHICLE.
Consequence:
Remedy:
DEALER WILL INSPECT THE WHEEL DISC DATE CODE AND REPLACE THOSE WHEELS INDICATING AN OCTOBER 18, 1979 DATE OF MANUFACTURE.
Units Affected:
12500
Notes:
FORD MOTOR COMPANY
|
1980 Ford E-250 Econoline
|