The new 2006 coupe and convertible inject a little more excitement into the styling. The two share the same sleek profile, although the roof on the coupe looks much better integrated (for obvious reasons). The frameless windows are indexed, meaning that they automatically open 0.25 inch when the doors are opened, and close again when the door is closed for a tight seal. From the rear, both cars feature narrow taillights and a sloping decklid that looks similar to the Toyota Solara coupe and convertible. We think it's an improvement over the blander styling of the sedan.
The Pontiac G6 is built in Michigan on GM's international Epsilon platform, from parts and ideas used on the Saab 9-3, Opel Vectra, Chevrolet Malibu sedan and Malibu Maxx wagonette, all introduced over the past two years.
All G6 models use the long wheelbase version of the Epsilon platform (like the Malibu Maxx), which gives them ride and handling finesse, with a structural stiffness that helps the G6 achieve a 27.3 Hz bending frequency, a big number that ranks with most luxury cars. Pontiac says the car is designed with three major torque rings that add stiffness and strength without taking up too much space or adding weight. In addition to the torque rings, the G6 structure also uses high-strength steel for about 60 percent of underbody components and central tunnel. Rather than just a single layer of sheet steel, the tunnel has an extra piece of steel welded between it and the floor pan. The stiff body uses fully isolated front and rear subframes to carry the heavy stuff, and the front one is hydroformed for strength and light weight. These measures can be experienced in the smooth ride and sharp handling of the G6. Next Page