1994 Volkswagen Golf III Recalls
GL Hatchback
1994 Volkswagen Golf III Recall Record
Recall ID # 95V178000 - ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN
Recall Date:
SEP 20, 1995
Component:
ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN
Description
IMPROPER MATERIAL WAS USED IN MANUFACTURING THE RADIATOR FAN MOTOR SHAFT CAUSING THE SHAFT TO WEAR AND BECOME NOISY.
Consequence
A WORN AND NOISY FAN MOTOR SHAFT CAN SEIZE RENDERINGTHE FAN MOTOR INOPERATIVE, EVENTUALLY CAUSING THE ENGINE TO OVERHEAT AND STALL. A STALLED VEHICLE IN TRAFFIC CAN INCREASE THE POTENTIAL FOR A VEHICLE ACCIDENT.
Remedy
DEALERS WILL REPLACE THE COMPLETE COOLING FAN ASSEMBLY ON VEHICLE HAVING THE POTENTIAL SHAFT MATERIAL PROBLEM. DEALERS WILL INSTALL A NEW FAN BLADE INCLUDING A NEW LOCK NUT ON VEHICLE WITH LOOSE FAN BLADE LOCK NUTS.
Manufacturer
VOLKSWAGEN OF AMERICA,INC
Recall ID # 95V054000 - EQUIPMENT:MECHANICAL:JACKS
Recall Date:
MAR 13, 1995
Component:
EQUIPMENT:MECHANICAL:JACKS
Description
THE JACKS SUPPLIED WITH THESE VEHICLES WERE ASSEMBLED WITH AN IMPROPERLY MACHINED SPINDLE, SO THAT A SHARP RIDGE ON THE EDGE OF SPINDLE'S THREAD WOULD HAVE REMAINED.
Consequence
THIS RIDGE CAN DAMAGE THE INSIDE THREAD OF THE JACK'S SCISSOR SHOE WHEN THE JACK IS USED TO LIFT THE VEHICLE. THE JACK COULD COLLAPSE WITH THE POSSIBILITY THAT A PERSON STANDING CLOSE TO THE VEHICLE COULD BE INJURED.
Remedy
OWNERS WILL BE PROVIDED WITH A NEW JACK.
Manufacturer
VOLKSWAGEN OF AMERICA,INC
Recall ID # 98V195000 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Recall Date:
AUG 17, 1998
Component:
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Description
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE REAR BRAKE LINE ON THE PASSENGER SIDE WAS ROUTED TOO CLOSE TO THE CORNER OF THE FUEL TANK. THE LINE COULD BE DAMAGED BY CHAFING AGAINST THE FUEL TANK.
Consequence
REPEATED CHAFING COULD EVENTUALLY RESULT IN A LEAKING BRAKE LINE CAUSING DIMINISHED BRAKING IN ONE BRAKE CIRCUIT INCREASING THE VEHICLE'S STOPPING DISTANCE.
Remedy
DEALERS WILL INSPECT THE BRAKE LINE AND REPLACE ANY DAMAGED LINES.
Manufacturer
VOLKSWAGEN OF AMERICA,INC
Recall ID # 95E034000 - VEHICLE SPEED CONTROL
Recall Date:
AUG 18, 1995
Component:
VEHICLE SPEED CONTROL
Description
WHEN INSTALLED IN THE VEHICLES, A TIE WRAP IS USED TO GUIDE THE CRUISE CONTROL CABLE IN THE ENGINE COMPARTMENT. SOME TIE WRAPS HAVE BEEN INSTALLED WITH A LARGE LOOP OPENING IMPROPERLY GUIDING THE CABLE WHICH COULD PREVENT THE THROTTLE FROM RETURNING TO ITS FULL IDLE POSITION.
Consequence
THE ENGINE SPEED MAY NOT RETURN TO IDLE INCREASING THEPOTENTIAL FOR A VEHICLE COLLISION.
Remedy
DEALERS WILL REMOVE THE CRUISE CONTROL TIE WRAP AND INSTALL A NEWLY DESIGNED GUIDE.
Manufacturer
ROSTRA PRECISION CONTROLS
Recall ID # 98V160000 - LATCHES/LOCKS/LINKAGES:HOOD:LATCH
Recall Date:
JUL 16, 1998
Component:
LATCHES/LOCKS/LINKAGES:HOOD:LATCH
Description
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE BOLTS SECURING THE FRONT HOOD LATCH CAN LOOSEN OVER TIME. THE LATCH WOULD MOVE CAUSING DISENGAGEMENT OF THE HOOD STRIKER FROM THE LATCH.
Consequence
UNEXPECTED OPENING OF THE HOOD COULD OCCUR OBSTRUCTING THE DRIVER'S VIEW OF THE ROAD WHILE DRIVING, INCREASING THE RISK OF A CRASH.
Remedy
DEALERS WILL INSPECT THE HOOD LATCH AND SECURING BOLTS AND REPLACE THEM IF NECESSARY.
Manufacturer
VOLKSWAGEN OF AMERICA,INC